Wire Saw & Wall Saw Cutting
Wall sawing is a process that uses a track mounted unit that can cut up to 600mm deep. The unit is remote controlled for operator safety.
Wire Saw Cutting
Diamond wire sawing allows almost any large concrete or masonry structure to be cut where other methods are not feasible.
It is an ideal tool for cutting and removing reinforced concrete, such as bridge sections, jetties, columns or beams. Diamond wire sawing is particularly useful when extremely thick and/or awkward shapes need cutting. Diamond wire can be wrapped around almost any size or shape of reinforced / mass concrete or masonry structure.
The wire is fed through a series of pulleys, and tensioned to suit the operator’s requirements. Once positioned, the diamond wire is pulled and rotated around the object at 25 linear meters per second. This enables the diamond beads attached to the wire to cut the material as it is pulled through.
The wire is cooled and flushed by water at all times: this helps to ensure ease of cutting and minimize overheating whilst in operation. As the wire is pulled through the object, any excess wire is stored on to a series of pulleys and stacked within the looping system. Our wire sawing machines are powered by 3 phase electricity.